Ryan S840

Over a year of continuous development and refinement are reflected in the S-Series loudspeakers. Each driver designed in house specifically for its application using the latest simulation and measurement software. The design of every motor and suspension perfected using the Klippel Distortion Analyzer and Scanning Vibrometer.

The drivers are blended seamlessly by the finely tuned crossovers producing near flat in room frequency response, even in less than ideal acoustic spaces. Each crossover component is chosen for its transparency and ability to let the music flow through unaffected.

The unique shape of the S-Series enclosures allows the acoustic centers of all drivers to be perfectly aligned. A large radius is applied to the front and rear baffles eliminating edge reflections. The S-Series features our silent core cabinet material with internal constrained layer damping. The S-Series enclosures reduce unwanted noise by up to 50dB compared to typical MDF enclosures.

We hope you can begin to see the care that has been taken to assemble what we believe is the finest speakers at their price points. In listening to the S-Series we hope you will hear all the amazing qualities of these loudspeakers and rediscover your music collection all over again.

Specifications

Description: 3-Way Floorstanding Loudspeaker
Tweeter: 1” (25mm) Chambered Beryllium Dome Tweeter
Midrange 4" (100mm) Laminated Nomex Cone, Die cast frame
Woofer: Two 8” (205mm) Laminated Nomex Cone, Die cast frame
Crossover: 350Hz and 2200Hz
Frequency Range: 28Hz – 35kHz +/-3dB
Sensitivity: 88dB (2.83V@1m)
Impedance: 6 Ohms Nominal, 4 Ohms Minimum
Amplifier Power: 50-250 watts
Enclosure: Bass-reflex via front-firing port
Inputs: Bi Wire - 5 Way binding posts
Height: 45.52" (1156mm)
Width: 9.84" (250mm)
Depth: 20.55" (522mm) with grille
Weight Each: 100lbs (45.38kg) Shipping Weight

Finishes:
Oak Veneer with Clear or Black finishes
Walnut Veneer with Clear or Red finishes
Cherry Veneer with Clear finish

*specifications subject to change